Spice Eftpos integration

For some of the event venues the pos terminals are using a westpac All in 1 device that is intergrated using SPICE. 

(IMPORTANT) Make sure that the terminal and the Eftpos device are on the SAME network 

For Pairing the device to the terminal the following steps will need to be taken: 

1. You will need the IP Address of the eftpos terminal as well as the eftpos ID  
   1. This information can be found under: Support - About Terminal (For Eftpos ID) For IP it is under Pairing information 
2. On the Terminal open the SPICE application and Enter in the EFTPOS ID as well as the IP Address. 
3. Open up the Pairing Screen on the EFTPOS and Select new pairing 
4. On the Terminal Select the Pair option. 
5. The Eftpos will ask for confirmation through a Code that is generated.